Search the Community

After performing the Jailbreak for iOS 13.5, I removed the Appdb profile for non-Jailbreak, and reinstalled the profile already configuring as Jailbroken, however when I went to download an app (Appdb Client) I get this image when I install it: PT-BR "Não foi Possível Instalar "appdb (unofficial)" Tente novamente mais tarde." ENG-US "Couldn't Install" appdb (unofficial) "Try again later." Can you help me with this?

Hello, I can’t find a guide for using appdb with a jailbroken device with AppSync. I set the device as jailbroken on appdb, then I try to install some apps but it get stuck on “ok. Prompting” The apps appear in the home screen but never get installed properly. What’s the problem? Thanks for the support.

Wondering if I did something wrong or somehow left myself open to an attack. I had been noticing that my phone (iPhone X, 11.3.1 jailbroken with MP Electra through AppDB) would crash such that the screen goes dark and the phone will not respond to hard resets. It lasted a few minutes here and there, and one time lasted almost an hour. I presumed it was one of the risks of running this type of jailbreak. Today, phone went dark for 20 minutes or so, and upon reboot, I saw a notification that my postmates delivery had arrived (I didn’t send for one). Someone in New York (I’m in Texas) bought almost $200 worth of baby formula and had it sent to their address using my account. I finally put two and two together and realized that all these dark screen moments were probably people hijacking my phone and looking through my files. Luckily there isn’t anything too juicy or steal-worthy in my phone... but that still sucks. Anyone had similar experiences, or did I make a security error somewhere in using this service?

Did you try installing apps/games from appdb onto your jailbroken device and failed to launch ? Read ahead as this guide might help you. This guide however will NOT fix apps that doesn't support iOS 11 to begin with. Check the Appstore for compatibility first. if you know your way around the OS then extract the ipa, locate the binary file, run command [ ldid -S path/to/binary ] and pack it to ipa again. ----------------------------------------------------------------------------------------------------------------- Getting Ready: 1. You need to be Jailbroken (Duh!.) 2.install "Filza File Manager", "Safari Plus" from the BigBoss Repo. 3.Install NewTerm 2 from Hashbang repo ( https://cydia.hbang.ws ) 4. Add Karen's repo.(https://cydia.angelxwind.net) 5. Install "Appsync Unified" (install only from official repo). 6. also add Jake Jame's Repo ( http://jakeashacks.com/cydia ) 6. install/update "Link Identity Editor 2" Getting to the Binary: 1. Visit appdb on your device and download the app/game you want to sign. 2. after the download the complete, open the Download Manger. 3. Tap on the downloaded IPA and click "show in Filza" 4. In Filza press Edit, select the IPA then tap Move. 5. browse to /var/mobile/Downloads 6. create a new folder and name it anything you want. For this guide i'll name it "signing". 7. open "sigining" and paste the IPA inside. 8. Tap on the IPA and choose "Extract" and wait....... 9. after a while (depending on the size) you'll find a newly created folder with the same name as the IPA next to it. 10.Open the extracted folder and browse thru the payload folder then the .app folder. Locating The Binary 1.The binary file usually carries the same name as the .app. p.s: in case you can't find it or it's not the same name as the app, it'll be the large file without any extension. 2. Copy the binary file outside the to the "signing" folder. Readying The Binary 1. Tap on the encircled "i" on the right on the file's name. 2. Tap on the first cell named "Parent" which contain the path to the file and copy. 3. scroll down until you find the "Ownership" cells 4. change the "Owner" to mobile instead of root by tapping the cell and choosing mobile from the list. Signing The Binary 1. Open NewTerm 2 2.Run the following command: ldid -S /path/to/binary replace "path/to/binary" with the copied path from before and complete with name of the file 3. if you get no errors that means it was successful. Packing and Installing The Binary 1.Return to Filza. 2. Copy the newly signed binary and place it back inside the .app folder 3.Confirm the replacement. 4. Browse back to the directory containing the “Payload” folder 5. Tap on Edit and select the Payload folder. 6. Tap More on the bottom right. 7. Select create Zip. 8. Rename the zip to “Payload.ipa” (you can name it anything as long as the extension is .ipa) 9. Tap on it then Install. Enjoy!!! # To-Do: guide on cracking while on a Jailbroken iOS11.

i have a jailbroken iphone 6 ios 10.3.2 with appsync installed from karens repo but everytime i try to install any app it says "unable to install at this time", any solution?

Has Somebody the same error that noncereboot1131 crashes every time ?

hi all, im a pro user (have been for a while now) with my iphone X ios 11.1.2, and have recently jailbroken my device with electra. i tried updating an app from appdb, but surprisingly it didnt update, so i went to appdb.to and saw that my hone shows up as NON JAILBROKEN, so i wanted to change that, but the question is "are you jailbroken with Appsync installed" i am jailbroken but do not have appsync installed. is that the reason it didnt update? should i mark "yes" even though i do not have appsync installed?

Can you please add extra_recipe beta 4 to the appdb store? I would like to sign the jailbreak for a year and custom loading the IPA doesn't work. Thanks

So for the request I would like beta 3 or beta 4 of Yalu jailbreak IPA to be signed for me to install through Cydia impactor or someone to make it work through appdb I'm over here going crazy over this and I can't figure it out , I purchased pro to be able to sign apps so I try to sign Yalu jailbreak from Pc to phone link and it installs on phone but immedialy force closes no matter if it's beta 3 or 4, I install app with Cydia impactor and app runs fine and doesn't force close but when I upload to sign through appdb and install it never wants to run ... can you help me out since I purchase pro hoping I could use this method but it doesn't work, id make you the bet that the whole world of jailbreak is relying on your answer because if u get mach_portal working and signed for a year rather than 7 days this will spread faster than wildfire and more people would buy pro , I love that you guys host 9.3.3 jailbreak but I upgraded to 7 plus and don't have that anymore ... Any feedback will help to get the ball rolling here to spread this new method Thanks in advance , Anthony

Today PanguTeam release a Jailbreak for iOS 9.2 - iOS 9.3.3 and this is a tutorial NOTES: Make a backup before jailbreak your device in order to avoid loss of data The jailbreak is compatible with 64-bit and firmware version iOS 9.2-9.3.3 Need to install on your computer iTunes, ensure that the computer and the access network iOS 9 devices are functioning properly, ensure that the equipment itself is fully charged. Every time you restart your iDevice, you'll have to open again the PP Jailbreak Assistant App - Semi Tethered Jailbreak If you AppDB Pro you can download the iPA here and go to the step 3 directly. Link Download Links: Link 1 / Link 2 / Link 3 Install the PP Assistant on your PC, Plug you iDevice and then press the icon you see below Then authorize the app on Settings - General - Profiles Go to home and press the PP Jailbreak App Allow notifications of the app Press the circle to Jailbreak and lock your iDevice Then wait to the notification and unlock the iDevice Finally after the device automatically restarts, open the PP Pangu jailbreak tool again to check the status of a successful Jailbreak Thanks to @PanguTeam for the Jailbreak and Thanks to @Chikipata94 for the tutorial

Does iapcrazy supports the newest versions of abbyy lingvo? After 3.17 version i couldn't "buy" any dictionaries. I want to update from ios7 to 9.2, but I need to know if the app is working. Or does the version 3.17 work on the 9.2? I'd be really appreciated if some of you could check.

original post by r3tribut10n all copy and pasted from him , all credit to him The TaiG team has just released a new version (v2.2.0) of their popular jailbreak tool for to jailbreak iOS 8.4. The TaiG jailbreak tool is compatible with the following devices: iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5 and iPhone 4s iPad Air 2, iPad mini 3, iPad Air, iPad 4, iPad 3 and iPad 2 iPad mini 1 (1st generation iPad mini), iPad mini 2 (Retina iPad mini), iPad mini 3 iPod touch 5th generation Important points before we proceed: TaiG jailbreak is available for Windows. For now, Mac users will have to run Windows in a virtual machine to use the TaiG jailbreak. We’ll let you know as soon as TaiG for Mac is released. So don’t forget to join usW on Facebook or Twitter TaiG jailbreak is an untethered jailbreak. TaiG jailbreak tool can jailbreak iOS 8.4, 8.3, iOS 8.2 and iOS 8.1.3. Please take a backup of your device using Use iCloud or iTunes to back up any and all personal information that you need to keep safe. The jailbreak has been reported to be working in most cases, but on the off chance something goes wrong, it’s a good idea to have an escape plan. Disable any Anti-virus programs or firewalls temporarily that could prevent TaiG Jailbreak from connecting to the internet. Step 1: Before you start, please take a backup of your device, preferably using iTunes. Step 2: Download the latest version of TaiG jailbreak from https://fileshack.net/e4r151yelb6gon your computer, and unzip the zip file. Step 3: Connect your device to your computer using the USB cable. Step 4: Temporarily Disable Passcode from Settings > Touch ID & Passcode. Step 5: Also temporarily turn off Find my iPhone from Settings > iCloud > Find my iPhone. Step 6: Please launch the application as an Administrator. Right click on the TaiG exe and select the “Run as Administrator†option. Step 7: TaiG will take some time to detect your device. Once you confirm that it is showing the correct firmware version, deselect the 3K Assistant 2.3.0 (TaiG’s App Store), just below Cydia 1.1.18. Step 8: Click on the green Start button to proceed. You will see the circular progress bar. Step 9: After the jailbreak is complete, your device will reboot automatically, and you should see the Cydia icon on the Home screen. The TaiG jailbreak tool will also tell you that the “Jailbreak Succeeded!†Please don’t forget to re-enable the passcode and Find My iPhone feature after successfully jailbreaking your device.

DOWNLOAD- LATEST VERSION from the official website - http://taig.com/en/ all credit to this bad*ass team V1.1.0　(2014-12-05) - DOWNLOAD Avoid sandbox generate redundant info. Officially built TaiG source(apt.taig.com), users who Jailbroke with TaiG before V1.1.0, can fix this problem by install TaiG 8.0-8.1.1 Untether. V1.0.2　(2014-11-30) You can delete 3K assistant from Cydia. V1.0.1　(2014-11-29) Accelerate Jailbreak speed. Improve the stability of Jailbreak. V1.0　(2014-11-29) Officially released TaiG Jailbreak Tool, which support all device with iOS8.0-8.1.1. Jailbreak tutorial for iOS8.0-8.1.1 Support device: iPhone 4s- 6Plus; iPad/iPad Air/2; iPad mini/mini2/mini3; iPod touch 5 Confirm your iOS device version is 8-8.1.1 Check version via: Settings - General - About - Version Attention: if OTA device failed in Jailbreak, please download the latest firmware and flash it, then continue Jailbreak. Please backup your data before Jailbreak Please use iTunes to backup your data in case of unnecessary lose. Turn off passcode and "Find My iPhone" function Before Jailbreak, please make sure turned off passcode and "Find My iPhone" function. Or Jailbreak will fail. 1. Turn off passcode via: Settings - Passcode - Turn Passcode Off 2. Turn off "Find my iPhone" via: Settings - iCloud - Find My iPhone - Click to turn off

Within two days of opening the app appaddict this has no content. Each section is empty and every feature of the app does not work. I tried to delete the app and reinstall it but I get this message (the message says "I can't connect to dev.appaddict.org) I also tried to re install AppSync but without resolving anything. I have an iphone 4 with ios 7.1.2 jailbroken. Does someone else have similar problems?

Check it http://evasi0n.com/ https://twitter.com/evad3rs This is a suprrise! Merry chrstmas or what? AA gonna be swaggin' now. just look at how many poeple online in chat. sh*t just got real HOW TO... JAILBREAK iOS7 - ALL CREDIT TO iCLARIFIED These are instructions on how to jailbreak your iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, or iPhone 4, on iOS 7.0 to iOS 7.0.6 (7.1 beta 1 and beta 2 work as well) using Evasi0n for Mac. DOWNLOAD v1.0.2: -Windows https://evad3rs.box.com/shared/static/6gkfbxr0d1cmxls4gdkl.zip -Mac https://evad3rs.box.com/shared/static/4r8pbr815z75xn180w29.dmg Before we begin, please make sure you have no passcode lock on your device (you can add it back after the jailbreak is applied). If you previously updated OTA, you must do a full backup then re-restore. SETTING IT UP, UPDATING TO iOS7, BACKUP, DOWNLOAD EVASION, ETC. JAILBREAKING iOS7.0.0 TO 7.0.4 AND ALSO 7.1 BETA1/BETA2 Step Ten Once your restore has successfully completed, right click (or control+click) the evasi0n app icon from the Pwnage folder then select Open from the contextual menu to launch the application. If prompted to confirm, click the Open button again. Step Eleven Ensure there are no lock screen passcodes on your device then click the Jailbreak button to begin. Step Twelve The app will retrieve information from the device to generate jailbreak data, upload jailbreak data, inject evasi0n app 1, inject evasi0n app 2, configuring system 1, configuring system 2, and then reboot. Step Thirteen You will then be asked to unlock your device and tap the new 'evasi0n 7' app icon. It is imperative that you only tap the icon once. The app will open and immediately close. Step Fourteen Evasi0n will then reboot the device again, modify rootfs, and then complete! Step Fifteen Your iPhone will now reboot with Cydia on the SpringBoard! Don't forget to download the iClarified app from here! Step Sixteen - Installing appsync, which is allows you to install cracked apps (basically paid apps free) this is optional, but if you want cracked apps and the AppAddict iOS app, you are going to need appsync.get it from the appaddict repo cydia.appaddict.org FULL GUIDE ON HOW TO GET APPSYNC HERE: https://www.appaddict.org/forum/index.php?/topic/6-installing-appsync/ or download a .deb here: http://limelinx.com/dkh3i then get the AppAddict iOS app and get swaggin' this tutorial is written by iclarified VIDEO TUTORIAL ALL CREDIT GOES TO iCLARIFIED AND THE EVADERS TEAM

IMPORTANT, FOR 6.1.6 , THE METHOD IS SLIGHTLY DIFFERENT, PLEASE SEE BELOW INSTRUCTIONS FOR 6.1.3-6.1.5 Instructions for pre-A5 devices with the tethered jailbreak (iPhone 4, 3GS, iPod Touch 4th gen): 1.) Have a tethered jailbreak (either via redsn0w [Point to 6.0 IPSW] or sn0wbreeze). 2.) Open Cydia. 3.) Click the “Changes†tab in the footer. 4.) Press the “Refresh†button in the top left corner. 5.) After “Reloading Dataâ€, perform a search for “p0sixspwn†(the O is a zero). 6.) Tap Install. You're untethered now! Instructions for other devices un-jailbroken on 6.1.3-6.1.5: 1.) Please take a backup of your device using iTunes 2.) Please disable the passcode on your iOS device temporarily for the jailbreak process. (Settings > General > Passcode Lock – Turn Passcode Off). Don’t forget to enable it after you’ve successfully jailbroken your device. 3.) Please uncheck Encrypt iPhone (iPad/iPod touch) Backup option in iTunes temporarily for the jailbreak process. Don’t forget to enable it after you’ve successfully jailbroken your device. 4.) Download the jailbreak for MAC (OS X 10.6+ only) or Windows 5.) Double click the downloaded file and extract the application. 5a.) Please note Windows users should extract p0sixspwn to your Desktop or C: drive prior to running. Do not run it directly from the zip. Please launch the application as an Administrator. Right Click on the evasion exe and select the “Run as Administrator†option. 6.) After launching p0sixspwn, it will prompt you to connect your iOS device. 7.) Connect your iOS device to the computer. p0sixspwn will mention that your device has been detected, and also show the iOS firmware version. 8.) Click on the Jailbreak button. 9.) After clicking on the Jailbreak button the tool will give a progress update on the various stages of the jailbreak process such as. [*]Connecting to device … [*]Getting payload files from Apple .. (If this fails, your internet connection has issues…) [*]Gathering information to generate jailbreak data… [*]Sending initial data … [You will see Restore in Progress on your iOS device] [*]Waiting to reboot. Do not unplug your device. [*]Waiting for device… [You will see this after the device has rebooted] [*]Remounting root… [*]Sending Cydia and untether payload to the device… [After sometime it will reboot the device] [*]Your device is now jailbroken, it now preparing to reboot automatically. Enjoy! INSTRUCTIONS FOR 6.1.6 this tutorial originally Posted by Gautam HERE on Mar 01, 2014 | 310 Comments italicized commentary by MONGOLO photos by Omar999666 If you’re an iPhone 3GS or iPod touch 4G user and have upgraded to iOS 6.1.6, which was released recently to fix a critical SSL bug then the good news is that it is still possible to perform an untethered jailbreak on your iOS device using a combination of Redsn0w and p0sixspwn. In this article we show you how to jailbreak iOS 6.1.6 first using p0sixspwn Cydia package. Here are some important points to note before you proceed. [*]This guide is meant for iPhone 3GS and iPod touch 4G users as iOS 6.1.6 is compatible with only these devices. If you’re looking for a jailbreak for iOS 7 or higher then checkout our jailbreak page for links to the latest tutorials. [*]Warning: If you depend on Ultrasn0w to unlock your iPhone, then DO NOT update to iOS 6.1.6. [*]Please note that jailbreaking your iOS device may void your warranty and hence proceed with caution and at your own risk. [*]Please do not forget to backup your iOS device before you proceed. You can refer to this post for instructions on how to backup your iOS device using iCloud or this one to backup your iOS device using iTunes. [*]Please ensure you are running latest version of iTunes. [*]This method uses an iOS 6.0 jailbreak with the iOS 6.1.6 filesystem, so it could cause some unknown issues. iOS 6.1.6: Step 1: Download Redsn0w 0.9.15b3 (Redsn0w 0.9.15 beta 3) from this link and save the application in a folder named “Redsn0w†on your desktop. Step 2: Download iOS 6.0 firmware file (yes, the trick is to point Redsn0w to the iOS 6.0 firmware file and NOT iOS 6.1.6 firmware file) for your iOS device from the links mentioned below: [*]iPhone Note: Please ensure you download the correct iOS 6.0 firmware file for your iPhone model. Check this link if you need any help in identifying which iOS firmware file to download for your iPhone model. [*]iPod touch Step 2: Connect your device to the computer and double click the Redsn0w zip file and extract the application. Navigate to the Redsn0w folder and launch the Redsn0w application. Windows 7 users should run the exe in Windows XP compatibility mode (right-click on the Redsn0w exe and select Properties, then select the Compatibility tab and select Run this program in compatibility mode for Windows XP). Windows XP and Windows 7 users should run Redsn0w as ‘Administrator’ (right-click on the Redsn0w exe and select ‘Run as an Administrator’). Step 3: Click on Extras button. Step 4: Then click on the Select IPSW button. Navigate and select the firmware file download in Step 2. It should successfully identify it and inform you that it will be used in the rest of the session. Step 5: Go back to Redsn0w’s main page and click on the Jailbreak button. Step 6: Redsn0w will now start preparing the jailbreak data. Step 7: You will now be prompted to select the jailbreak options. Make sure Cydia is selected and click on the Next button to continue. You can also select Enable battery percentage option. Step 8: You will now be prompted to put your iOS device into the DFU mode. Turn off your device, however keep it plugged in to the computer. Step 9: Click on the Next button. Redsn0w will take you through the necessary steps: (a) Hold the Power button on your iOS device down for 3 seconds: ( Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds: © Now release the Power button while keeping the Home button pressed until Redsn0w detects the device: Note: Check this tutorial if you’re having trouble putting your device in DFU mode. Step 10: Your iOS device should reboot now. Please remember to release the Home button. Step 11: Your iOS device will reboot again and Redsn0w will now begin uploading the new RAM disk and kernel. Step 12: You will be notified once the jailbreaking process is complete. Click on the Quit button to exit the application. Step 13: The rest of the process will take place on your iOS device, wait for it to complete. Your iOS device will reboot once again (which could take approximately 5 minutes). You will now see the Home screen on your iOS device, but Cydia would still be missing, that’s because you still need to tether boot your iOS device using Redsn0w. So follow the steps mentioned below. Boot tethered: Step 14: Launch Redsn0w again. Step 15: Click on Extras button. Step 16: Then click on the Select IPSW button. Navigate and select the firmware file downloaded in Step 2. Step 17: Then click on the Just Boot button. Step 18: You will now be prompted to plug your iOS device to the computer and switch it OFF again. Follow the instructions and click on the Next button to move to the next screen: Step 19: You will now need to put your iOS device into the DFU mode. Redsn0w will take you through the necessary steps: (a) Hold the Power button on your iOS device down for 3 seconds: ( Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds: © Now release the Power button while keeping the Home button pressed until Redsn0w detects the device: Step 20: Redsn0w will recognize the iOS device in DFU mode and apply the limerain exploit (remember to release the Home button). Your iOS device will reboot and a pineapple logo will appear, indicating a tethered boot. Step 21: Wait for the process to complete, once it is complete, you should see the Lock screen on your iOS device. Your iPhone or iPod touch has now been successfully jailbroken and you should see Cydia on the Home screen. If you don’t find it on the Home screen, please don’t panic, search for it using Spotlight. The jailbreak is currently a “tethered†jailbreak, Convert Tethered Jailbreak to Untethered Jailbreak using P0sixspwn: Step 22: Launch Cydia. Since you’re launching Cydia for the first time, you may be prompted to do an essential upgrade. Please go ahead and do it, and then relaunch Cydia again. Step 23: Tap on the Search tab, and search for p0sixspwn. Step 24: Tap on p0sixspwn from the search results, tap on Install, followed by the Confirm button. Step 25: Tap on Return to Cydia when prompted. That’s it, your iOS device has now been successfully (untethered) jailbroken. Troubleshooting Tips: 1. Can’t find Cydia: If you can’t find Cydia on the home screen then double check you have tethered boot your device. Please ensure you’ve followed steps 14 to 21. 2. Unsupported IPSW: If you get an error message informing you that the IPSW is not supported by this version of Redsn0w, then it means you’ve downloaded iOS 6.1.3 firmware file in step 2 instead of iOS 6.0 firmware file. Please download iOS 6.0 firmware file to jailbreak your iOS device running on iOS 6.1.3. 3. Cydia closes immediately: If Cydia closes immediately when you try to launch it, it means that you haven’t installed p0sixspwn package from Cydia. Follow steps 22-24 mentioned above to solve this issue. Credits: @winocm, @ih8sn0w, @SquiffyPwn @DblD (tutorial) @Gautam (tutorial)@Omar999666 (pictures)

the other day when jailbreaking an iPod touch 2g model on iOS 4.2.1 , it came to my attention that all links were down for the download of the Greenpis0n jailbreak tool, so I decided to make this post. This owrks with all devices on 4.1.x and 4.2.x , really nowadays the only one you should be on is 4.2.1 ..and it works with the MC model iPod touch 2g (unlike redsn0w) ... have fun.... Download GreenPois0n for Windows [Mirror] Download iOS 4.2.1 for iPhone 4, 3GS, iPod touch 4G / 3G / 2G and iPad Its here finally ! Chronic Dev Team has released Windows version of GreenPois0n iOS 4.2.1 untethered jailbreak for iPhone, iPad and iPod touch. And just like the Mac version, Windows version is compatible with iPhone 4, 3GS, iPod touch 4G/3G/2G and iPad. Instructions for jailbreaking iOS 4.2.1 untethered on Windows are exactly same as the Mac version. Simply follow our detailed step by step instructions posted here to jailbreak all iOS devices on 4.2.1, untethered using GreenPois0n.